Recent developments in the processing and applications of structural metals and alloys : selected peer reviewed papers from the international conference on Recent developments in the processing and applications of structural metals and alloys, conference organized to celebrate the 70th birthday of prof. Enrico Evangelista, Dept. of Mechanical Engineering, Marche Polytechnic University, Italy, Como (Italy) from 22nd to 25th June 2008 /
Recent developments in the processing and applications of structural metals and alloys : selected peer reviewed papers from the international conference on Recent developments in the processing and applications of structural metals and alloys, conference organized to celebrate the 70th birthday of prof. Enrico Evangelista, Dept. of Mechanical Engineering, Marche Polytechnic University, Italy, Como (Italy) from 22nd to 25th June 2008 /
Processing and applications of structural metals and alloys
edited by Marcello Cabibbo and Stefano Spigarelli.
- Stafa-Zurich ; United Kingdom : Trans Tech Publications, 2009.
- 1 online resource (viii, 430 pages) : illustrations
- Materials science forum, v. 604-605 0255-5476 ; .
- Materials science forum ; v. 604-605. .
Includes bibliographical references and index.
Fabrication and Characterisation of Nanostructured Coatings by Magnetron Sputtering for Wear Resistant Applications -- Bimetallic PdZn Nanoparticles for the Partial Hydrogenation of Phenylacetylene -- Oxidation Behaviour and Thermal Stability of Nanocomposited Ti-Al-Si-B-N and Ti-Cr-B-N Coatings -- Nanoindentation of Silicon -- Backstress, the Bauschinger Effect and Cyclic Deformation -- Constitutive Equations for Mg Alloy Hot Work Modeling -- Microstructure and Mechanical Characterization of an Al-Zn-Mg Alloy after Various Heat Treatments and Room Temperature Deformation -- Features on Grain-Structure Evolution during Asymmetric Rolling of Aluminium Alloys -- New Model for Characterization of Dynamic Recrystallization and Prediction of Grain Size Applied to Two Wrought Magnesium Alloys -- Developing Superplasticity in Metallic Alloys through the Application of Severe Plastic Deformation -- Effect of Al₃(Sc, Zr) Particles on Tensile Properties of an Al-Zn-Mg-Cu-Sc-Zr Alloy -- Seam Welds in Hollow Profile Extrusion: Process Mechanics and Product Properties -- FeCrAl Alloys Produced by Roll-Bonding and Annealing of Al(RE)-Clad Stainless Steel: How Addition of Hf and Zr Affects their Oxidation Behaviour -- Room Temperature Plastic Flow Localization in a Mn-Alloyed Austenitic Steel -- Effects of Temperature and Sheet Thickness on Formability of AZ31 Magnesium Alloy -- Consolidation of Amorphous Aluminum Alloy Powder by Equal Channel Angular Extrusion -- A Multipass ECAP Study of Modified Aluminium Alloys -- Plastic Flow and Grain Refinement under Simple Shear-Based Severe Plastic Deformation Processing -- Nanostructures and Microhardness in Al and Al-Mg Alloys Subjected to SPD -- TEM Characterization of Two Spark Plasma Sintered Fe-1.5wt.%Mo Steels Stabilized with SiO₂ and TiO₂ -- Damping of FeMo Alloys Obtained from SPS Sintering of Nanostructured Powders -- Hot Working of the ZEK200 Magnesium Alloy -- Development of Ultra-Fine Microstructure in Titanium via Powder Metallurgy for Improved Ductility and Strength -- Bulk Metallic Glasses -- Fatigue Properties of Steels with Ultrasonic Attrition Treated Surface Layers -- Texture and High-Angle Boundary Formation during Deformation Processing -- Hot Formability and Texture Formation in Al Alloys -- Superplastic Deformation of Twin Roll Cast AZ31 Magnesium Alloy -- Study of Hot Formability of High Nitrogen Martensitic Stainless Steel -- Failure at Elevated Temperatures: Influence of Dynamic Restoration -- Long-Term Heat Treatments on Ti6Al4V-SiC[subscript f] Composite. Part I -- Microstructural Characterization -- Long-Term Heat Treatments on Ti6Al4V-SiC[subscript f] Composite. Part II -- Mechanical Characterization -- Pre-Primary Stage of Low Strain Rate Creep in Metals -- Constitutive Equations in Creep of the AE44 Magnesium Alloy -- Creep Response and Microstructural Changes during Intermittent Heating of Advanced Tempered Martensitic 9-12%Cr Steels -- Warm Formability of AZ31 Magnesium Alloy Sheets under Different Process Conditions -- Role of Boundaries in Control of Deformation Rate and Strength of Crystalline Materials -- Interpretation of Profile and Intercept Counts in Microstructure Characterization -- Ti-ZrO₂ Interactions during Manufacturing of High Porous Ti/Ti-Based MMC of Regulated Structure -- New Lean Duplex Stainless Steels for Structural Applications.
This volume brings together the most exciting ideas of international, and especially European, researchers concerning the latest developments in severe plastic deformation techniques and in the thermomechanical processing of materials for both structural and functional applications. The areas of interest include not only the conventional hot- and cold-deformation of metals but also recently developed severe plastic deformation processes for the production of ultra-fine and nanostructured materials. In particular, the following specific topics are covered: Multifunctional nanostructured coating.
9783038132615 (electronic bk.) 3038132616 (electronic bk.)
Metals--Finishing--Congresses.
Founding--Congresses.
Structural engineering--Congresses.
Métaux--Finition--Congrès.
Fonderie--Congrès.
Technique de la construction--Congrès.
TECHNOLOGY & ENGINEERING--Material Science.
Founding.
Metals--Finishing.
Structural engineering.
Electronic books.
Electronic books.
Conference papers and proceedings.
TS653 / .R43 2009 e-book
620.16
Includes bibliographical references and index.
Fabrication and Characterisation of Nanostructured Coatings by Magnetron Sputtering for Wear Resistant Applications -- Bimetallic PdZn Nanoparticles for the Partial Hydrogenation of Phenylacetylene -- Oxidation Behaviour and Thermal Stability of Nanocomposited Ti-Al-Si-B-N and Ti-Cr-B-N Coatings -- Nanoindentation of Silicon -- Backstress, the Bauschinger Effect and Cyclic Deformation -- Constitutive Equations for Mg Alloy Hot Work Modeling -- Microstructure and Mechanical Characterization of an Al-Zn-Mg Alloy after Various Heat Treatments and Room Temperature Deformation -- Features on Grain-Structure Evolution during Asymmetric Rolling of Aluminium Alloys -- New Model for Characterization of Dynamic Recrystallization and Prediction of Grain Size Applied to Two Wrought Magnesium Alloys -- Developing Superplasticity in Metallic Alloys through the Application of Severe Plastic Deformation -- Effect of Al₃(Sc, Zr) Particles on Tensile Properties of an Al-Zn-Mg-Cu-Sc-Zr Alloy -- Seam Welds in Hollow Profile Extrusion: Process Mechanics and Product Properties -- FeCrAl Alloys Produced by Roll-Bonding and Annealing of Al(RE)-Clad Stainless Steel: How Addition of Hf and Zr Affects their Oxidation Behaviour -- Room Temperature Plastic Flow Localization in a Mn-Alloyed Austenitic Steel -- Effects of Temperature and Sheet Thickness on Formability of AZ31 Magnesium Alloy -- Consolidation of Amorphous Aluminum Alloy Powder by Equal Channel Angular Extrusion -- A Multipass ECAP Study of Modified Aluminium Alloys -- Plastic Flow and Grain Refinement under Simple Shear-Based Severe Plastic Deformation Processing -- Nanostructures and Microhardness in Al and Al-Mg Alloys Subjected to SPD -- TEM Characterization of Two Spark Plasma Sintered Fe-1.5wt.%Mo Steels Stabilized with SiO₂ and TiO₂ -- Damping of FeMo Alloys Obtained from SPS Sintering of Nanostructured Powders -- Hot Working of the ZEK200 Magnesium Alloy -- Development of Ultra-Fine Microstructure in Titanium via Powder Metallurgy for Improved Ductility and Strength -- Bulk Metallic Glasses -- Fatigue Properties of Steels with Ultrasonic Attrition Treated Surface Layers -- Texture and High-Angle Boundary Formation during Deformation Processing -- Hot Formability and Texture Formation in Al Alloys -- Superplastic Deformation of Twin Roll Cast AZ31 Magnesium Alloy -- Study of Hot Formability of High Nitrogen Martensitic Stainless Steel -- Failure at Elevated Temperatures: Influence of Dynamic Restoration -- Long-Term Heat Treatments on Ti6Al4V-SiC[subscript f] Composite. Part I -- Microstructural Characterization -- Long-Term Heat Treatments on Ti6Al4V-SiC[subscript f] Composite. Part II -- Mechanical Characterization -- Pre-Primary Stage of Low Strain Rate Creep in Metals -- Constitutive Equations in Creep of the AE44 Magnesium Alloy -- Creep Response and Microstructural Changes during Intermittent Heating of Advanced Tempered Martensitic 9-12%Cr Steels -- Warm Formability of AZ31 Magnesium Alloy Sheets under Different Process Conditions -- Role of Boundaries in Control of Deformation Rate and Strength of Crystalline Materials -- Interpretation of Profile and Intercept Counts in Microstructure Characterization -- Ti-ZrO₂ Interactions during Manufacturing of High Porous Ti/Ti-Based MMC of Regulated Structure -- New Lean Duplex Stainless Steels for Structural Applications.
This volume brings together the most exciting ideas of international, and especially European, researchers concerning the latest developments in severe plastic deformation techniques and in the thermomechanical processing of materials for both structural and functional applications. The areas of interest include not only the conventional hot- and cold-deformation of metals but also recently developed severe plastic deformation processes for the production of ultra-fine and nanostructured materials. In particular, the following specific topics are covered: Multifunctional nanostructured coating.
9783038132615 (electronic bk.) 3038132616 (electronic bk.)
Metals--Finishing--Congresses.
Founding--Congresses.
Structural engineering--Congresses.
Métaux--Finition--Congrès.
Fonderie--Congrès.
Technique de la construction--Congrès.
TECHNOLOGY & ENGINEERING--Material Science.
Founding.
Metals--Finishing.
Structural engineering.
Electronic books.
Electronic books.
Conference papers and proceedings.
TS653 / .R43 2009 e-book
620.16