Advanced Engineering and Materials /
Advanced Engineering and Materials /
edited by Wen Jin and Chao-Ming Lin.
- Zurich : Trans Tech Publications, ©2015.
- 1 online resource (28 pages) 1 online resource (286 pages) : illustrations (some color)
- Advanced Materials Research ; v. 1077 .
- Advanced materials research ; v. 1077. .
Taihe Circuit, a Novel Circuit Topology for Conversion from Single-Phase to Three-Phase.
Includes bibliographical references.
Advanced Engineering and Materials; Preface and Organizing Committee; Table of Contents; Chapter 1: Engineering Materials; Alternate Materials for Glass Fibre; Development of Mica-Based Glass-Ceramic with 4 Mol% of Fluorapatite; A Study on Nanosilver Adhesive for LED Light Application; Preparation and Adsorption Study of Gelatin/Activated Carbon Composite Bead Form; Precipitation Behavior and Magnetic Properties of Nanoscale Particles in a Cu-10 at% Ni-5 at% Co Alloy; Chapter 2: Technologies and Systems of Materials Processing. The Experimental Analysis of Cold Pressed Joint Technology for Selected Sheet Metals Used in an Automotive Industry; Analysis of Fracture Process and Common Defects in Casting Alloys EN43100 Manufactured by Die Casting Technology; Fabrication of the Electroplated CBN Wheel for Cylindrical Grinding with Abrasive Phyllotactic Pattern; Investigation on Work Hardening Behavior of Nickel-Base Superalloy during Hot Working Process by EBSD; Cutting Performance of Coated High Speed Steel Hobs in Dry Hobbing. Preliminary Experimental Study on Effect of Cutting Fluid on Milled Surface Quality of Iron-Base Superalloy; Experiment Research of Coal's Spontaneous Combustion Characters; Disk Laser Welding of ZE 41 Magnesium Alloy; Disk Laser Welding of Copper to Stainless Steel; Application of a Ternary Zn-Based Solder Alloy for Joining of AZ31B Magnesium Alloy with Ultrasonic Support; Influence of Tool Design and Process Parameters on Friction Stir Weldability of AZ31B Magnesium Alloy; Optimization of Drilling Process Parameters for Minimizing Surface Roughness in Carbon-Carbon Composite Materials. Chapter 3: Building Materials and Technologies; Evaluation of Durability of Mineral Wool Products; Development of Mechanical Properties of Steel Fibers Reinforced High Strength Concrete; Parallel Heat Transfer Model of a Panel with Phase Change Material for Thermal Storage Applications Computed on Graphics Processing Units; Latent Heat Storage Plaster: Lab-Scale Experiment and Simulation; Analysis of Mechanical Properties of a Fibre Composite Containing Secondary Raw Materials. Quality Characterization of Iron Dust Exhaust Thermal as Alternative Ceramic Coating Raw Materials in a Brazilian Company; Accelerated and Natural Weathering of Wood-Polypropylene Composites Containing Pigments; Chapter 4: Designing and Researching of Machines and Mechanisms, Control and Automation; Eccentric Loading Condition Analysis of 1MN Dead Weight Force Standard Machine; Research on Wheel Loader Duty Cycle Test and Numerical Expression; A Comparing Study on Voltage Support Ability between STATCOM and Generator; Piezoelectric Optimum Placement via LQR Controller.
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Mechanical Engineering and Materials (ICMEM 2014), November 5-6, 2014, Singapore. The 46 papers are grouped as follows: Chapter 1: Engineering Materials; Chapter 2: Technologies and Systems of Materials Processing;Chapter 3: Building Materials and Technologies; Chapter 4: Designing and Researching of Machines and Mechanisms, Control and Automation; Chapter 5: Signal and Data Processing, Computer Algorithms; Chapter 6: Engineering Management in Industry.
9783038267546 (electronic bk.) 3038267546 (electronic bk.)
Mechanical engineering--Congresses.
Materials--Congresses.
Génie mécanique--Congrès.
Matériaux--Congrès.
TECHNOLOGY & ENGINEERING--Metallurgy.
Materials.
Mechanical engineering.
Electronic books.
Electronic books.
Conference papers and proceedings.
TA401 .J384 2014
669.1092345
Taihe Circuit, a Novel Circuit Topology for Conversion from Single-Phase to Three-Phase.
Includes bibliographical references.
Advanced Engineering and Materials; Preface and Organizing Committee; Table of Contents; Chapter 1: Engineering Materials; Alternate Materials for Glass Fibre; Development of Mica-Based Glass-Ceramic with 4 Mol% of Fluorapatite; A Study on Nanosilver Adhesive for LED Light Application; Preparation and Adsorption Study of Gelatin/Activated Carbon Composite Bead Form; Precipitation Behavior and Magnetic Properties of Nanoscale Particles in a Cu-10 at% Ni-5 at% Co Alloy; Chapter 2: Technologies and Systems of Materials Processing. The Experimental Analysis of Cold Pressed Joint Technology for Selected Sheet Metals Used in an Automotive Industry; Analysis of Fracture Process and Common Defects in Casting Alloys EN43100 Manufactured by Die Casting Technology; Fabrication of the Electroplated CBN Wheel for Cylindrical Grinding with Abrasive Phyllotactic Pattern; Investigation on Work Hardening Behavior of Nickel-Base Superalloy during Hot Working Process by EBSD; Cutting Performance of Coated High Speed Steel Hobs in Dry Hobbing. Preliminary Experimental Study on Effect of Cutting Fluid on Milled Surface Quality of Iron-Base Superalloy; Experiment Research of Coal's Spontaneous Combustion Characters; Disk Laser Welding of ZE 41 Magnesium Alloy; Disk Laser Welding of Copper to Stainless Steel; Application of a Ternary Zn-Based Solder Alloy for Joining of AZ31B Magnesium Alloy with Ultrasonic Support; Influence of Tool Design and Process Parameters on Friction Stir Weldability of AZ31B Magnesium Alloy; Optimization of Drilling Process Parameters for Minimizing Surface Roughness in Carbon-Carbon Composite Materials. Chapter 3: Building Materials and Technologies; Evaluation of Durability of Mineral Wool Products; Development of Mechanical Properties of Steel Fibers Reinforced High Strength Concrete; Parallel Heat Transfer Model of a Panel with Phase Change Material for Thermal Storage Applications Computed on Graphics Processing Units; Latent Heat Storage Plaster: Lab-Scale Experiment and Simulation; Analysis of Mechanical Properties of a Fibre Composite Containing Secondary Raw Materials. Quality Characterization of Iron Dust Exhaust Thermal as Alternative Ceramic Coating Raw Materials in a Brazilian Company; Accelerated and Natural Weathering of Wood-Polypropylene Composites Containing Pigments; Chapter 4: Designing and Researching of Machines and Mechanisms, Control and Automation; Eccentric Loading Condition Analysis of 1MN Dead Weight Force Standard Machine; Research on Wheel Loader Duty Cycle Test and Numerical Expression; A Comparing Study on Voltage Support Ability between STATCOM and Generator; Piezoelectric Optimum Placement via LQR Controller.
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Mechanical Engineering and Materials (ICMEM 2014), November 5-6, 2014, Singapore. The 46 papers are grouped as follows: Chapter 1: Engineering Materials; Chapter 2: Technologies and Systems of Materials Processing;Chapter 3: Building Materials and Technologies; Chapter 4: Designing and Researching of Machines and Mechanisms, Control and Automation; Chapter 5: Signal and Data Processing, Computer Algorithms; Chapter 6: Engineering Management in Industry.
9783038267546 (electronic bk.) 3038267546 (electronic bk.)
Mechanical engineering--Congresses.
Materials--Congresses.
Génie mécanique--Congrès.
Matériaux--Congrès.
TECHNOLOGY & ENGINEERING--Metallurgy.
Materials.
Mechanical engineering.
Electronic books.
Electronic books.
Conference papers and proceedings.
TA401 .J384 2014
669.1092345